The Nut is a component of a fastening arrangement with a femalethread (on the inside). It normally has some shape or form on theoutside to assist with rotating it so that it will tighten onto amale part and typically come in a right handed thread (tightenedwhen turned in a clockwise direction). Note that some nuts areavailable that are left hand threaded (tightened when turnedanti-clockwise).

T Slot Nuts Nz Free

• Hexagon Nuts

  Hex Nuts are the most commonly used nut for all types offastenings. They are available in metric coarse thread (standard),metric fine threads, Unified National Coarse (UNC), UnifiedNational Fine (UNF) and British Standard Whitworth (BSW). Metricsizes are made to the DIN 934 standard.
• 
  

• Nyloc Nuts

  Similar and complimentary to the hexagon range, the majordifference being the nylon ring inserted at the end of the nut.This is a self-locking device to stop the nut undoing underconstant vibration or load variations. It is not suitable for usewhere the temperature is liable to exceed 120 degrees Celsius. Foruses where high temperatures are incurred a range of spring metallock nuts are available in 304 grade only. Metric sizes are made tothe DIN 985 standard.
• 
  

• Dome Nuts

  (Acorn or Cap Nuts) come in two styles, one piece or two piece. Aone piece Dome Nut is made from a solid piece of stainless to DIN1587 Standards and the two piece is a hexagon nut with a dome capfused to one end and made with a high polish finish.
• 
  

• Lock Nuts, Half Nuts or Jam Nuts

  These are used under a Hex Nut or another Lock Nut to lock thefastening and stop it from undoing. They are similar to a Hex Nutbut not as high and in metric sizes are made to the DIN 439standard.
• 
  

• Wing Nuts

  The range and grades are similar to the hexagon nuts. These nutsare used in situations where a fastening is often undone and doneup but does not require an over tight fitting. The pressure thatcan be exerted by your fingers is sufficient to hold thefastening.
• 
  

• Hank Bushes

  These are internally threaded but with a round outside and with asmall reduced diameter shoulder. Designed for welding into sheetmetal fabrications so that a fastening can be used to hold firmlyin the sheet product.
• 
  

• Coupling Nuts

  These are very long hexagon nuts that are used to join two longthreads together and are made to DIN 6334 standard.
• 
  

• Flange Nuts

  Used mainly on concrete retaining type fastenings and automotive orsheetmetal fabrications. They are made for sheetmetal punching andare designed so that the 4 prongs and body come through from theback of timber and hold to stop the nut from rotating. They aremainly used in furniture/upholstery work.
• 
  

• Barrel Nuts

  Barrel Nuts have a long internal female thread and one end closedwith a drive. Either Philips, Slot or Socket.
• 
  

• Bumax Nuts

  Bumax Nuts are a range of higher tensile Stainless Steel hexagonnuts.

Pins, Washers, Oring, Nuts & Bolt Packs, Key Steel, Grommets, Springs, C-Clips & More Buy Universal T-Track & Clamp Systems Online - New Zealand Sort: Relevance. T-Slot Nuts can be inserted from the end of the extrusion, or rolled into place anywhere along the profile. The nice little spring clip holds them in place while assembling Chrome plated steel. The Bosch Rexroth's T-Nut series are standard element for secure, conductive connections. Profile finishing is not required. Insulating cover cap for decoupling directly grounded components for use with T-nuts for 8 mm slots in a 10 mm slot. Become a Machineryhouse Mate! Sign up for Mates Rates. New Zealand's Leading supplier of Engineering, Metal & Wood working machinery. Buy online or in-store at our location in East Tamaki - Auckland.

T Slot Nuts Nz For Sale

For Australian customers see StainlessSteel Nuts